Welding Machines

• Allows for any input voltage hookup (208-575 V) with no manual linking, providing convenience in any job setting. Ideal solution for dirty or unreliable power.
• Meter calibration allows digital meters to be calibrated for certification.
• 120-volt auxiliary power receptacle for cooling systemor small tools.
• Wind Tunnel Technology protects internal electrical components from airborne contaminants, extending the product life.
• Program memory features nine independent program memories that maintain/save your parameters.
• Auto-postflow adjusts the length of postflow time based on the amperage setting, shielding your tungsten and eliminating the need to set the postflow time.

• Easy to install with a new switch on the outside of the package, the machine can be changed between low and high input voltage ranges. Also, since the switch is on the back, input voltages can be changed without removal from inverter racks.
• Lift-Arc start provides TIG arc starting without the use of high frequency
• Adaptive Hot Start for Stick arc starts automatically increases the output amperage at the start of a weld should the start require it. Prevents the electrode from sticking
• Portable in the shop or at the job site - at 41 pounds the CST 280 is easily moved from location to location.
• Six-foot power cable included.
• Provides a simple means of protecting and transporting welding power sources for construction, power plant turn-arounds and shipbuilding applications. 
• The CST™ 280 Rack’s low weight (340 pounds fully loaded) enables use of elevators to move rack. 
• Top cover to protect the machines from falling debris. Meets NEC requirements with appropriate fuses. 
• Lift truck side and end fork pockets. 
• Lifting eye simplifies transportation using crane or overhead lifting device. 
• One main disconnect box with fused circuit breaker switches for each machine. 
• Common output ground connection (for same polarity use only). 
• CSTs can be paralleled for air carbon arc gouging. 
• Running gear (optional). 

• Easy to install with a new switch on the outside of the package, the machine can be changed between low and high input voltage ranges. Also, since the switch is on the back, input voltages can be changed without removal from inverter racks.
• Lift-Arc start provides TIG arc starting without the use of high frequency
• Adaptive Hot Start for Stick arc starts automatically increases the output amperage at the start of a weld should the start require it. Prevents the electrode from sticking
• Portable in the shop or at the job site - at 41 pounds the CST 280 is easily moved from location to location.
• Six-foot power cable included.

• Portable in the shop or at the job site as 32 lb the Maxstar 200 STR ca be easily moved from location to location.
• Inverter-based, DC power source has a simple-to-use operator interface providing only the necessary controls in a compact machine.
• Lift-Arc start provides TIG arc starting without the use of high frequency.
• Superior Stick arc performance on all input voltages. Even on the difficult-to-run electrodes like E6010.
• Optional 4-pack racks are available for multiple operator applications. These are commonly used in construction and shipyard applications.
• Remote amperage control provided through 14-pin receptacle on front of the machine. This permits use of standard remote amperage control devices.
• Stick Stuck feature helps to prevent the electrode from sticking to the part in the Stick welding mode.

• Superior arc welding performance with Stick.
• Built-in Arc Control ensures consistent arc control regardless of electrode size.
• Consistent Welding Output even if Primary Input Power varies by +- 10%
• 115 VAC duplex receptacleprovides 15 amps of auxiliary power
• Thermal Overload Protection Light helps to prevent machine damage if the duty cycle is exceeded or airflow is blocked.
• Power Efficient

• Portable in the shop or at the job site can be easily moved from location to location.
• Inverter-based, DC power source has a simple-to-use operator interface providing only the necessary controls in a compact machine.
• Ideal solution for dirty or unreliable power, allows for any input voltage hookup providing convenience in any job setting.
• Lift-Arc start provides TIG arc starting without the use of high frequency.
• Superior Stick arc performance on all input voltages.
• Stick Stuck feature helps to prevent the electrode from sticking to the part in the Stick welding mode.
• DIG control allows the arc characteristics to be changed for specific applications and electrodes.

• Digital welding meters display both amperage and voltage for viewing of the actual and preset values for greater accuracy and repeatability in your welding procedure.
• High frequency for non-contact arc initiation that reduces tungsten and material contamination.
• Syncro Start allows the choice of Soft, Medium or Hot TIG starts based on the tungsten size and application.
• AC balance control provides adjustable oxide removal which is essential for creating the highest quality aluminum welds.
• Last procedure recall simplifies changing your Syncrowave back and forth from aluminum TIG to stainless TIG to Stick welding. One switch makes all the control panel changes.

• Allows for any input voltage hookup (115-460 V) with no manual linking, providing convenience in any job setting. Ideal solution for dirty or unreliable power.
• Fan-On-Demand power source cooling system operates only when needed, reducing noise, energy use and the amount of contaminants pulled through the machine.
• Lift-Arc starting provides x-ray clean welds in AC or DC arc starting without the use of high frequency.
• Blue Lightning high-frequency arc starter for non-contact arc initiation. Provides more consistent arc starts and greater reliability compared to traditional HF arc starters. Easy to set and increases productivity.
• Extended AC balance (30-99%) controls the amount of oxide cleaning (amperage time in EN) which is essential for high quality welds on aluminum.

• The XMT 425 Series is packed with features to meet the most demanding welding needs.
• Inverter arc control technology provides greater puddle control for superior 6010 Stick electrode performance, and outstanding MIG weld performance.
• Large, dual digital meters are easy to view and are presettable to ease setting weld output.
• Auto Remote Sense(TM) enables unit to automatically use remote control if connected to remote control receptacle.
• 115 VAC auxiliary power provides 10 amps of circuit-breaker-protected power for water circulators. Available on CE model.
• Pulsed MIG (GMAW-P) capabilities with optional Optima(TM) control reduces spatter and distortion, allows better out-of-position puddle control, and provides potential reduction of fume particle emission.

We are offering MMA Welding Machine to our clients.

Features

• Ideal solution for dirty or unreliable power, allows for any input voltage hookup providing convenience in any job setting.
• Multi-Voltage Plug (MVP)allows for connection to 120- or 240-volt receptacles
• Portable in the shop or at the job site can be easily moved from location to location.
• Thermal overload protection with indicator light helps prevent machine damage
• Single amperage range allows operator to accurately set amperage on both primary power.
• Power Factor Corrected (PFC) for optimum performance

• Migmatic has industrial 4 roll-gear-driven, cast aluminium drive system features no-tool, quick-change reversible drive rolls (1.0/1.2mm) and easy-to-set, tension adjustment knobs.
• Easy-to-use digital user interface displays clear, precise readings of arc voltage, wire speed or amperage while welding. Also displays 2T/4T Trigger mode
• Adjustable Wire Run-in & Burn-back controls allows the user to optimise arc starts & stops, reducing wire stubbing or wire burning back onto the contact tip.
• Built-in Spot-weld feature provides consistent timed welds.
• Traditional tapped design & Laminated Inductor Provides a stable, smooth Arc operators appreciate
• Removable consumable compartment provides convenient storage space for contact tips, nozzles, drive rolls etc.
• Wire Jog feature enables the operator to thread the MIG wire through the torch, without the wire being live.

• Choice of three power sources, two interface controls and range of wire drive motor and accessories.
• Newly designed digital control and communication electrodes improve weld performance and simplify equipment integration in more advance applications.
• Easy to setup and operate as the SubArc Digital Series Interface controls recognize the power source and wire drive connected, and automatically configure the system for proper operation.
• Accessories powered with 24 VAC control voltage from the power source. All power sources, interface controls and wire drives are IP-23 rated providing a high level of protection for harsh environments.