- Home
- ยป
- Our Products
- »
- Oxy Fuel Products
Oxy Fuel Products
Messer Minitherm Torch
Product Brochure
Torch Type | Soldering Torch, Welding torch |
Brand | Messer |
Material | Brass |
Size | 2 HA - 3 HA |
Packaging Type | Boxes |
Oxygen Pressure | 1.0 to 2.5 bar |
Acetylene Pressure | More than 0.2 bar |
The MINITHERM® product range has been developed in accordance with the requirements of industry and trade for a small and lightweight injector torch to cover special demands.
Compared with conventional hand torches the considerably lower weight of our MINITHERM® handles and attachments enable fatigue-free continuous working. This is of particular advantage in pipework construction, sanitary sector, in manufacturing of jewellery, dental laboratories and for other precision parts as well as for mass production of hand-welded, brazed or heat-treated components.
Due to the small handle size any welding, brazing and heating work in difficult areas and hard to reach locations can usually be carried out with adequate free moving space.
Key features:
- High level of safety thanks to the injector suction principle: The mixing of oxygen with fuel gas is effected using the under-pressure mixing system. This prevents the intrusion of fuel gas into the Oxygen supply. MINITHERM® torches meet the requirements of the established accident prevention regulations.
- Universal range of applications: A wide range of torch inserts with varying flame characteristics and flame powers offers a virtually complete range of applications from the barely visible micro flame up to the powerful welding and cutting flame.
- Large moving space through small size: Through the compact size of the handle and inserts it is possible to carry out welding, brazing, soldering and heating tasks even at hard to access locations without any problems
- Fatigue free working through the low weight: The low weights of the handle and inserts make the MINITHERM® torch significantly lighter than conventional oxyfuel hand-held equipment. This ensures fatigue-free long-term use and gives high production quality.
- Comprehensive accessories program: The MINITHERM® program includes various pressure regulators, safety devices, hoses for Oxygen and different types of fuel gases, torch supports, flame ignition accessories and a broad range of accessories to enable the widest variety of applications to be tackled smoothly.
Cylinder Pressure Regulator- Messer Typhoon Pressure Regulators
Minimum Order Quantity: 1 Piece
Product Brochure
Media | Gas, Water |
Automation Grade | Manual |
Finishing | Glossy Finish |
Accuracy (%) | 99.9% |
Handle Material | Bakelite |
Packing Type | Boxes |
Surface Treatment | Polished |
Features
- Save gases by using facility to lock pressure and flow.
- S.S.Sintered central micro filter avoids contamination of valve seat and gas leakage.
- Thick NBR diaphragm supported by large backup plate.
- Minimum pressure fluctuation.
- High flow rates even at low cylinder pressure.
- Sintered inlet filter prevents dust and contamination from entering the regulator.
- Forged brass body and housing cap. Fire retardant valve seat material.
Messer Gas Economizer
Product Brochure
Material of Construction | SS |
Grade | SS 304, 310, 316 |
Surface Treatment | Polished |
Standards | EN ISO, BSP, CGA and NFS |
Pressure | 3,5 bar / 51 psi oxygen pressure |
Application | Industrial |
We are offering Gas Economizer to our client and our product is made of good quality.
Messer Gas Economizer automatically discontinues the supply of oxygen and fuel gas to the torch when the torch is placed on the hook during the intervals between operations. The flame does not require re-setting on resuming operations. When the torch is unhooked, the full gas is released and the previous mixing ratio is maintained. It greatly improves brazing efficiency and productivity and economy ingas consumption and is absolutely necessary whenever work involves frequent temporary stoppages, as in production brazing
GAS Economizer
¿¿ For saving Oxygen, Fuel Gas, Time and Torch Wear
¿¿ Robust Construction- Greater efficiency and safer operation
¿¿ Pilot Flame- Easy restart of torch without resetting of flame
¿¿ Easy Installation- Can be fitted on any work bench or wall bracket
¿¿ Designed in accordance to the most current internationally recognized standards EN ISO, BSP, CGA and NFS
¿¿ Manufactured under the quality management system of EN ISO 9001
¿¿ 100% tested before dispatch
¿¿ Principally designed for general workshop welding, heating and brazing up to 3,5 bar / 51 psi oxygen pressure
¿¿ Simple to fit to any work bench or wall bracket with angle mounting bracket supplied
¿¿ Discontinues automatically the supply of oxygen and fuel gas to the torch when the torch is placed on the hook during the intervals between operations
¿¿ The flame does not require re-setting on resuming operations
¿¿ When the torch is unhooked, the full gas flow is released and the previous mixing ratio is maintained
¿¿ Absolutely necessary whenever work involves frequent stoppages; as in production brazing
¿¿ Greatly improves brazing efficiency & productivity and economy in gas consumption
Slicer Cutting Tips
Product Brochure
Model | Smith Slicer Cutting Tips |
Material | Brass, Aluminium |
Brand | SMITH |
Surface Treatment | Chrome Plated |
Application | Industrial |
Packaging Type | Boxes |
Features
- Each tip is a precision engineered mixer for combining preheatoxygen and fuel gas to attain maximum efficiency.
- Quick, easy tip change encourages use of right tip for the job.
- After the first tightening with a wrench, all that's needed to seat thetip snugly is hand-tightening. No need to search for a wrench tochange tips; threads on tip nut won't be stripped by over-tightening.
- Compressible soft seats are practically indestructible and they withstand very high temperatures, resulting in longer tip life.
- Mirror smooth gas passages deliver stable gas flows for high heat transfer, fast starts and clean cuts, also, minimizes slag build-up, and reduces clean-up time.
Gas Cutting Torch
Minimum Order Quantity: 1 Piece
Product Brochure
Material | SS, Brass |
Fuel Gas Type | Oxy-Acetylene |
Cutting Range | 3 - 300 mm |
Surface Treatment | Chrome Plated |
Length | 510 mm |
Head Type | 90 deg Solid Forged Brass Head |
Torch Weight | 1050 gms |
We are offering Gas Cutting Torchยฟยฟto our client and our product is made of good quality.
Features
- New Generation Nozzle Mixing Technology
- High resistance to back fires
- Comfortable working for continuous operation
- Rugged design ensures maximum strength
- Precise flow rates
- Heavy duty applications even at low cylinder pressures
- Reduced Post Cut Grinding Operation
Torch Handle Airtherm
Product Brochure
Material | Brass |
Fuel Gas Type | Oxy-Acetylene |
Application | Industrial |
Surface Treatment | Chrome Plated |
Packaging Type | Boxes |
The new high performance brazing and heating Torch Handle Airtherm continues the tradition of Messer gas brazing and heating equipment with the quality and reliability. The torch series Airtherm for fuel gas propane/ atmospheric air with a power and higly stable flame even in most adverse condition is a proven design incorporating the latest technical feature necessary to meet the ever-changing application and requirement for gas gas brazing and heating. The brazing and heating torch Airtherm is the low cost, high quality, value alternative.
Additional Information:
- Item Code: Part-No-0-463-452